emtelle logo DE

QWKCONNECT


Pre-Connectorised  FTTH  Open Trench  Indoor  

Emtelle QWKconnect is a pre-connectorised fibre drop cable for FTTH that offers product and installation cost savings, and a reduction in installation equipment. The fibre is pre-installed and pre-connectorised into a microduct during manufacture, meaning that no blowing or fibre splicing is required, thus offering a simple product requiring a reduced skill set and training for the install.

KEY BENEFITS

  1. 1.

    A duct that can be installed underground (direct buried and ducted), along walls or even overhead, including wifi antennas.

  2. 2.

    SC and LC APC connector options available.

  3. 3.

    No blowing or fibre splicing required for the customer drop.

KEY FEATURES

  • A duct that can be installed underground (direct buried and ducted), along walls or even overhead, including wifi antennas.
  • Fibre pre-installed can be connectorised at one end or both ends.
  • SC and LC APC connector options available.
  • No blowing or fibre splicing required for the customer drop.
  • Extremely small storage area for excess fibre.
  • Reduced skill set & training required for the install.
  • Massively reduced capex for installation equipment.
  • Cost (and space) effective compared to similar products in the market.

Product Map

product map

Installation Steps

  1. 1.

    Install QWKconnect between Cabinet / Closure and the customer allowing for upto 2 metres overlength

  1. 2.

    Rotationally cut Microduct at base of cabinet / closure

  1. 3.

    Pull out the remaining 2 metres of fibre

  1. 4.

    Insert the ELF (Emtelle Locking Fibre system) to hold the QWKconnect fibre in place

  1. 5.

    Assemble the connectors 3 body parts around the Ferrule

  1. 6.

    Plug the assembled fibre connector into the fibre adapter after cleaning

  1. 7.

    Rotationally cut Microduct to correct length to fit overlength box

  1. 8.

    Assemble the connector 3 body parts around the Ferrule at the customers end

  1. 9.

    Coil excess fibre bundle in closure, clean connector, then plug into the fibre adapter

DOCUMENTATION

SELECT DOCUMENTS
QWKconnect Brochure 2023
Datasheet

RELATED SOLUTIONS

QWKLINK

Product image

Emtelle QWKlink pre-connected fibre bundle allows for fibre connectors on both ends, eliminating the need to splice fibres for FTTX drop applications.


DETAILS

EMTELLE HOME CONNECT

Product image

A pre-connectorised fibre microduct system for internal & external use. This product is intended for use where an installer needs a quick and easy one stop solution for an internal/external drop cable installation.


DETAILS

Got any questions? Speak to our Solutions Expert

Contact Us

Colin Kirkpatrick
Solutions Director


Subscribe to our Newsletter